Furnace Repair in Hondo

Serving Hondo and every community across Medina County.

Tell us about the job

Takes about a minute. No obligation.

Step 1 of 3: Equipment
A black mailbox on a weathered wooden post stands on a grassy lawn in front of a single-story brick house with a gray shingled roof during rainfall, with tall pine trees behind.

A contractor quoting furnace repair in Medina County is looking at what the system has actually been through, and the local weather record puts that in context. 88 severe weather events were recorded in Medina County, Texas between 2015 and 2024. At roughly that pace, severe weather is a real but infrequent pressure on equipment here. A furnace that is failing has most likely been worn down by age, neglected filters, or an installation that was never quite right rather than by weather stress. That is what a contractor is checking first: heat exchangers, ignition components, and the service history.

NOAA National Centers for Environmental Information, Storm Events Database, bulk CSV export, events 2015-01-01 through 2024-12-31.
Interior of a concrete block garage with a closed sectional door, large round metal ducts running along the exposed wood joist ceiling, an aluminum step ladder and a tall fabric sack on the floor.

Furnace age and house age rarely match, but in a county where the housing stock runs this old, the gap between them is wide enough that a furnace installed well after the house was built can itself be deep enough into its service life that its parts have left the standard catalog. Half the homes in Medina County, Texas were built in 1996 or earlier (2020-2024 ACS 5-year). A contractor opening a furnace here checks manufacturer date codes and cross-references what is still being made before quoting a repair, because a fix that looks straightforward on the surface can stall at the parts sourcing stage. The repair scope follows from what is actually available, not from what the diagnosis first suggests.

U.S. Census Bureau, 2020-2024 American Community Survey 5-Year Estimates

The Parts of a Furnace a Contractor Checks First

Isometric cutaway illustration of a single-story house showing interior rooms with furniture, ceiling ductwork, a furnace unit with a tall flue pipe, and a dark shingled roof.

The heat exchanger sits inside the furnace cabinet and is the piece a contractor looks at closely during a repair call. Cracks or corrosion there affect both heating output and safety. The burner assembly, which sits just below it, is another frequent source of trouble when a furnace heats unevenly or fails to light.

The blower motor and its fan wheel sit at the base of the cabinet and push conditioned air out through the supply plenum. The control board, mounted inside the same cabinet, reads the thermostat signal and tells every other component when to act. A failed board can mimic the symptoms of several other faults, so contractors check it alongside the parts it controls.

The drawing shows a typical furnace layout, and a licensed contractor determines which components apply to your specific system and what work each one needs.

Find a contractor in Medina County

Medina County by the Numbers

88

88 severe weather events were recorded in Medina County, Texas between 2015 and 2024.

NOAA National Centers for Environmental Information, Storm Events Database, bulk CSV export, events 2015-01-01 through 2024-12-31.
1996

Half the homes in Medina County, Texas were built in 1996 or earlier (2020-2024 ACS 5-year).

U.S. Census Bureau, 2020-2024 American Community Survey 5-Year Estimates
19,890

Medina County, Texas holds 19,890 housing units (2020-2024 ACS 5-year).

U.S. Census Bureau, 2020-2024 American Community Survey 5-Year Estimates
83.8%

Owners occupy 83.8% of the occupied homes in Medina County, Texas (2020-2024 ACS 5-year).

U.S. Census Bureau, 2020-2024 American Community Survey 5-Year Estimates
Codes & Standards Governing Furnace Repair in Medina County, Texas5 sourced rules and standards

What happens when the contractor comes out

Non-weatherized gas furnaces manufactured on or after November 19, 2015 must reach 80.0 percent AFUE.

U.S. Department of Energy10 CFR 430.32, Energy and water conservation standards and their compliance dates, Electronic Code of Federal Regulations.Verified 2026-09-10

Non-weatherized oil-fired furnaces manufactured on or after November 19, 2015 must reach 83.0 percent AFUE.

U.S. Department of Energy10 CFR 430.32, Energy and water conservation standards and their compliance dates, Electronic Code of Federal Regulations.Verified 2026-09-10

Mobile home gas furnaces manufactured on or after November 19, 2015 must reach 80.0 percent AFUE.

U.S. Department of Energy10 CFR 430.32, Energy and water conservation standards and their compliance dates, Electronic Code of Federal Regulations.Verified 2026-09-10

Non-weatherized gas furnaces manufactured on or after December 18, 2028 must reach 95.0 percent AFUE, up from the 80.0 percent minimum that applies to units manufactured before that date.

U.S. Department of Energy10 CFR 430.32, Energy and water conservation standards and their compliance dates, Electronic Code of Federal Regulations.Verified 2026-09-10

Licensing Rules for HVAC Repair in Medina County, Texas

In Texas a person may not engage in air conditioning and refrigeration contracting unless that person holds a license issued under the state air conditioning and refrigeration contractor law.

Texas Department of Licensing and RegulationTex. Occ. Code Ch. 1302 (Texas Department of Licensing and Regulation)Verified 2026-09-10

Severe Weather Events in Medina County

Extreme weather puts real hours on heating equipment. Furnaces that cycle hard through weather stress are the ones that show up in repair calls, which is why local conditions shape local service demand.

Severe weather events by county — Medina County
20100
2015201620172018201920202021202220232024
19

88 severe weather events, 2015–2024. Source: NOAA National Centers for Environmental Information, Storm Events Database.