What to do when the heat goes out in Waco, TX

Step 1 of 3: Equipment

Why did my furnace stop heating in Waco?

Most homes in and around Waco heat with electricity, and a furnace that's gone quiet usually points to something specific rather than wear from heavy use. Winters here are mild, so an electric furnace doesn't run nearly as hard or as long as the air conditioner does in summer. When it stops, you want to know what part failed before you decide whether it's something to look at yourself or something that needs a contractor.

Check the breaker before anything else

An electric furnace draws a lot of power, and a tripped breaker is the most common reason one stops heating overnight. If the breaker's fine, the next likely cause is the heating elements themselves, or the limit switch that shuts the furnace off if airflow is blocked. Because winters here are mild, these furnaces don't run for months at a stretch the way they might elsewhere, so a sudden failure is more often a specific part giving out than general wear. A furnace that blows cold air but won't shut off points to the thermostat or the elements, not the breaker. Either way, the fix means a licensed contractor checking the actual part, since electric furnace repair involves line voltage that isn't safe to test on your own.

A woman with long wavy brown hair in a grey ribbed sweater sits on a couch indoors, looking toward a window, with a potted palm-like plant and fireplace behind her.
A woman with long brown hair wearing a green V-neck top and beige cardigan sits on a light sofa, looking off to the side, with a dining table, lamp and framed picture in the background.
A woman with long dark hair in a cream knit sweater sits on a beige sofa indoors, looking toward a bright window with a houseplant and framed picture in the background.
A woman with long dark hair in a green knit sweater sits on a couch indoors, smiling and looking toward a window with a blurred room behind her.

How cold does it actually get, and how long does the furnace run?

  • Winter nights average 38°F

    Winter nights average 38°F in McLennan County. That's cold enough to need working heat, but not cold enough to push a furnace to its limit night after night.

  • Heat runs November through March

    Heat runs November through March here, about five months. A furnace that fails early in that stretch still has months of work ahead of it.

  • 70.7% of homes heat with electricity

    70.7% of homes in McLennan County heat with electricity. If yours is one of them, the furnace and the breaker panel are the first places a problem shows up.

NOAA nClimDiv 1991-2020 · ACS 2020-2024

A gray high-efficiency furnace with two access panels stands in a bare basement corner, connected to sheet-metal ductwork, white PVC vent pipes, and flexible gas and electrical lines.

Breaker trips once and stays off

A breaker that trips once and holds is worth a look before you call anyone. Reset it, and if it trips again right away, stop. That's the furnace telling you something inside it is drawing too much current, and resetting it again won't change that. If it holds after one reset, the trip may have been a fluke. Either way, note what you saw. A contractor will want to know if it tripped once or kept tripping.

A gas furnace with metal ductwork, copper and yellow gas piping stands against a wall in an empty room with a bare concrete floor.

Breaker keeps tripping on reset

A breaker that trips every time you reset it is not asking for a second try. That pattern points to a short or a failing part pulling more power than the circuit allows, and forcing it back on repeatedly can damage the furnace further. Leave it off, and don't keep flipping it. Since most homes here heat with electricity, this is also a panel-level problem worth having a contractor check soon, not something to leave alone through a cold night.

Check It Yourself or Call Now

Call a contractor now

  • A licensed contractor can test the heat strips, the sequencer and the blower motor with meters you don't have.
  • If the breaker trips again after one reset, that's a short or a failing part, and guessing further risks damage to the furnace or the panel.
  • A contractor carries the parts and the amp draw figures to tell you in one visit whether it's a $40 part or a failing heat strip.
  • Waiting on a guess can mean a cold house for days while you order the wrong part or try a fix that doesn't hold.
  • Matching with a contractor means you explain the problem once, not to five different companies while you compare quotes.

Check it yourself first

  • A breaker that trips once and resets clean, a thermostat with a dead battery, or a closed vent are all things you can rule out in minutes.
  • Checking the thermostat settings and the batteries costs nothing and sometimes that's the whole problem.
  • Walking the vents to confirm they're open tells you whether the issue is airflow or the furnace itself.
  • If the furnace runs but the air isn't warm, that's different from the furnace not running at all, and worth noting before anyone looks at it.
  • Doing this first means when a contractor does come out, you can tell them exactly what you've already ruled out.
  1. Thermostat calls for heat and signals the furnace control board.

  2. Blower motor starts pulling air through the return ducts.

  3. Sequencer energizes the electric heat strips one at a time.

  4. Air passes over the hot heat strips and warms up.

An older gas furnace with a louvered front panel stands on a concrete basement floor beside large sheet-metal ductwork, a metal flue pipe, copper piping and wood framing.
Before you get your furnace repair
A beige high-efficiency furnace stands on a concrete basement floor beside sheet-metal ductwork, with white PVC vent pipes, flexible conduit and copper and steel piping running up a concrete wall to an electrical box.
After you get your furnace repair
A gray gas furnace on a concrete pad in an unfinished basement, connected to sheet-metal ductwork, white PVC venting, and a yellow gas line, with concrete walls and wood framing in the background.

Get matched with a furnace pro in McLennan County

Explain the furnace problem once instead of to every shop in McLennan County.

A McLennan County pro who repairs furnaces gets your request.

Get a local pro

Asking costs nothing, and the choice to hire stays yours.

A smiling man in a denim shirt and white t-shirt stands in an open dark doorway of a stucco house, facing a woman with long brown hair and a green jacket seen from behind in the foreground.

A quiet furnace shows up fast in a house with kids or older parents

A 38°F night doesn't give a house much room to coast. Without the furnace running, rooms cool off within a few hours, and the first ones to feel it are usually the people who can't just put on another layer and wait, a toddler, a grandparent, anyone who's sick already. You'll notice it as a draft near the floor before the thermostat even shows a big drop.

There's also what you don't see: electric heat strips and a sequencer that don't get checked until something's wrong, and a breaker that may be hiding a bigger problem than a flipped switch. Instead of spending the evening calling around to find out who even works on this in McLennan County, you can get matched with a contractor who handles electric furnaces like yours, and let them reach out to you directly.

Interior corner with a beige sofa holding a dark green and a light cushion and a textured throw, a potted small-leaved tree beside a white-framed window, and a dark shallow bowl on a wooden coffee table in the foreground.
A gray high-efficiency furnace with white PVC vent pipes stands in an unfinished basement beside sheet-metal ductwork, gas piping, and insulated stud walls on a concrete floor.

Furnace running the way it should

Air moves through the return duct and over the heat strips without tripping anything. The blower runs steady, the cabinet stays quiet, and every room gets the same warm air. No burning smell, no short cycling, no breaker popping.

A beige sheet-metal furnace with a louvered upper panel stands on a concrete basement floor, connected to galvanized ductwork, white PVC vent pipes, and a metal gas line with an electrical box.

Furnace that needs a look

A furnace that cycles off early, blows cool air, or trips its breaker more than once isn't working through a rough patch. Something inside, the sequencer, a heat strip, the blower motor, has already failed or is close to it.

What am I noticing right now in my own house

A room that won't come up to temperature no matter where the thermostat is set. Air coming from the vents that feels barely warm, or not warm at all. A clicking sound at the furnace when it tries to start, then nothing. Maybe a burning smell the first time it ran this year, or a breaker that won't stay reset. Some rooms may still feel fine while others don't, depending on where you are in the house. With nights averaging 38°F here, a furnace that's not heating right shows up fast for anyone in the house who's already sensitive to cold, and it's worth figuring out which of these signs you're seeing before it gets worse.

An older woman with short gray hair in a cream cable-knit turtleneck sweater smiles while looking to the side in a wooden kitchen, with a round loaf of bread on a board in the foreground and a lit candle by a dark window.
A woman and a child wrapped together in a thick knitted blanket on a sofa, both with eyes closed, with a lit table lamp and houseplant in the dim background.

Why electric furnaces trip breakers

Heat strips draw a lot of current, more than almost anything else in the house. When a furnace is new or was just serviced, the strips, the sequencer and the wiring handle that load without issue. As a part wears, like a sequencer relay that's starting to stick, the load stops being clean, and the breaker reads that as a problem and shuts off. A breaker doesn't trip for no reason. It trips because somewhere between the panel and the heat strips, something is asking for more than it should.

Why a mild winter still needs repair

McLennan County doesn't get the kind of cold that forces a furnace to run hard for months straight, and that works in your favor most years. But the nights that drop into the 30s still need the furnace to come on, and a furnace that's down doesn't know the forecast is mild overall. A house here loses heat fast once the air stops moving, because these homes aren't built around holding warmth through a long freeze the way houses further north are. Mild winters lower how often you need heat. They don't lower what happens when you don't have it.

Winter nights average 38°F

At 38°F, a house without heat starts losing ground by midnight. Your furnace isn't fighting extreme cold here, just a steady chill that settles in overnight and stays until the sun's back up. That's why a quiet furnace at 2 a.m. in McLennan County is a problem worth fixing before morning, not waiting out.

NOAA nClimDiv 1991-2020

A furnace that's gone quiet in McLennan County is usually a sequencer, a heat strip, or a breaker that's had enough, and you've already got a decent read on which it might be. What's left is the part that isn't about the furnace at all: finding someone licensed to go test it, getting a call back, and not having to describe the clicking sound and the breaker trip and the cold bedroom three separate times to three separate people. That's the piece that goes away here. You answer once, and it reaches a contractor who already knows what you're dealing with before the truck shows up. Winter nights average 38°F here, mild compared to a lot of places, but mild doesn't help much at 2 a.m. in a house that's stopped heating. The furnace still needs a licensed hand on the sequencer and the strips. What you don't need is the hour spent calling around to find that hand in the first place.

Sunlight falls across a beige upholstered sofa with a textured woven cushion and a chunky knit throw, beside a dark wood cabinet holding a ceramic vase with green leafy branches, near a white-framed window.
A sunlit corner of a room with a wooden side table holding a ceramic vase of green foliage and a wooden bowl, beside a light upholstered sofa with a knit throw and rust-colored pillow, with window shadows cast on a beige wall.
A sunlit room corner with beige walls, a white-framed window with sheer cream curtain, wood floor with a light rug, and a woven basket holding a knit blanket.
A beige ceramic vase holding a leafy green branch sits on a wooden cabinet in a corner, with sunlight through a sheer curtain casting leaf shadows on the wall.
A grey upholstered sofa with a rust-orange velvet cushion and a textured throw sits beside a window with linen curtains, next to a wooden side table holding a pale ceramic vase of olive branches.

Find a furnace repair pro in McLennan County

Fill out one short form instead of calling around.

Match me with a pro

No fee to send it, and nothing to sign.