Profile view of a bearded man wearing a black baseball cap and a dark gray T-shirt against a plain light background.

What size generator runs a furnace in Texas

Step 1 of 3: Equipment

What size generator do I need to run my furnace?

Most homes in Texas heat with electricity, so when the power goes out in a winter storm, the furnace stops along with everything else. You're looking at a generator and trying to figure out what size actually keeps it running, since an undersized one just trips or burns out trying.

A 5,000 to 7,500 watt generator runs most furnaces

An electric furnace draws more power at startup than it does once it's running, and that startup surge is what sizes the generator, not the day to day draw. A furnace with a blower motor and electric heat strips can pull close to its rated watts the moment it kicks on, so a generator in the 5,000 to 7,500 watt range covers most homes here. If the furnace is part of a larger electric heat system, or you're running other things on the same generator, you need more than that. The number on your furnace's nameplate, or the specs from whoever installed it, tells you exactly what you're sizing for.

  1. Power drops and the electric furnace shuts down completely.

  2. A generator starts and sends power to the home's panel.

  3. The blower motor and heat strips draw their full load first.

  4. The thermostat calls for heat and the furnace responds normally.

Winter nights average 41°F statewide

A 41°F night doesn't sound brutal, and it isn't, but it's enough to keep your electric furnace cycling most of the night to hold a comfortable temperature. A generator sized for that steady draw keeps the house warm through the outage instead of just taking the edge off.

NOAA nClimDiv 1991-2020 county normals weighted by homes

A smiling man in a dark navy sweater sits on a light sofa in a living room, with a glass bowl of popcorn on a wooden coffee table and bookshelves behind him.
A smiling man in a dark green sweater sits on a tan leather sofa in a dimly lit living room, with a bowl of popcorn in the foreground and a kitchen area blurred behind him.
A smiling middle-aged man in a dark shirt sits on a gray sofa in a living room, with a bowl of popcorn on a side table and shelves, a window and kitchen area behind him.
A smiling bearded man in a dark gray t-shirt sits on a gray couch in a living room, with a large glass bowl of popcorn on a wooden table in the foreground.

Portable Power or Standby System

Portable Generator

  • A portable unit can power the furnace blower and controls, but most don't have the surge capacity for electric heat strips kicking on at the same time.
  • You run an extension cord or have a transfer switch installed to feed the furnace circuit directly.
  • Fuel means gasoline or propane you store and refill by hand, usually every 8 to 12 hours under load.
  • It has to sit outside, away from windows and doors, which means running it in the same ice storm that knocked the power out.
  • Sizing one for an electric furnace with heat strips often means 10,000 watts or more, which pushes past what most portable models offer.
  • You start it yourself when the power drops, so it only runs when you're there to turn the key.

Standby Generator

  • A standby generator is wired into the home's electrical panel and sized to carry the furnace's blower and heat strips together.
  • It runs on natural gas or a propane tank plumbed to the house, so there's no fuel to haul or refill.
  • An automatic transfer switch senses the outage and starts the generator within seconds, with no one needing to be home.
  • It sits on a pad outside, permanently installed, so there's nothing to set up when a storm hits.
  • Sizing is done against the furnace's full electrical load, including startup draw, so the heat strips don't trip it.
  • It keeps running for as long as the outage lasts, since it draws fuel from the gas line or a tank instead of a tank you carry.
A beige furnace with a louvered front panel and metal ductwork stands on a concrete basement floor beside pipes and a white cylindrical water heater.
Before you get your furnace installation
A gray high-efficiency furnace in a basement with PVC venting pipes, a yellow gas line, metal ductwork, concrete walls and floor, and a wood-framed stairway at left.
After you get your furnace installation

A local pro for your furnace installation

Once you send the form, finding a pro is off your list.

Sending the form costs nothing.

Sizing It Right for Winter

  • Most Texas homes heat with electric furnaces, so the blower and heat strips set the generator size you need.
  • Heat strips draw the biggest load of the whole system, more than the blower motor pulls on its own.
  • A generator sized only for the blower will stall or trip the moment the strips kick on.
  • Steady winter nights in the 40s keep the furnace cycling for hours, not minutes, so the generator has to hold that load the whole time.
  • A portable unit can run the controls but usually can't carry the surge from the heat strips.
  • An installed system matched to your furnace's full draw keeps the heat running through the whole outage.

The question was what size generator runs your furnace, and the answer comes down to the heat strips, not the blower. Most furnaces here are electric, so the generator has to carry the full load of the strips kicking in, not just the smaller draw of the blower and controls. That's where undersized units fail. A portable generator might start the furnace and keep the thermostat calling for heat, but the moment the strips engage, the surge trips it or stalls it out. And a Texas winter night doesn't let up after one cycle. A night in the 40s has the furnace running for hours, cycling on and off to hold the temperature, which means the generator is carrying that load the whole time, not just at startup. A unit sized for a quick surge and nothing more leaves you cold by midnight. The fix is matching the generator to the furnace's full draw, strips included, so the system restarts every time the thermostat calls for heat and keeps running as long as the power's out. That's a sizing question specific to your furnace, your panel and how the heat strips are wired in, which is where an installer comes in. Getting the number right the first time means the generator is sitting there ready when the next storm knocks out power, instead of tripping breakers while the house gets cold.

A woman with dark hair in a bun reclines on a sofa with her eyes closed, wrapped in a cream fleece blanket, a closed blue hardcover book resting in front of her, with a lit lamp and a vase of dried flowers in the background.
A smiling bearded man in a navy sweater sits at a candlelit dinner table with a glass of red wine, a bowl of salad, and plates of food in the foreground.

Get the right pro for your furnace

Sizing a generator for an electric furnace comes down to the heat strips, not just the blower. Get that wrong and the unit trips or stalls out the first cold night you need it. A contractor who installs generators can check your furnace's actual draw and your panel before anything goes in, so the size matches what your system really pulls. Send the form and a contractor who handles this in your area will reach out. From there, getting it sized and installed is off your plate.

Get a local pro

After you send the request, you're done searching.

You're not committing to anything by asking.